Tubby Bath Repair Kit – White, Centurion

Give a tired, chipped or stained bath a bright new finish with the Tubby Bath Repair Kit from Centurion.

This complete DIY resurfacing kit has everything you need to refresh your bath at home, without the cost and upheaval of a replacement. The white coating is mixed with the supplied hardener, then rolled and brushed over the bath for a smooth, clean finish.

Suitable for porcelain, fibreglass, ceramic, cast iron, pressed steel and plastic baths, the coating takes around three hours to apply, and your bath is ready to use again after 48 hours' drying time.

• Complete kit for resurfacing a bath in white
• Two-part coating and hardener
• Suitable for porcelain, fibreglass, ceramic, cast iron, pressed steel and plastic
• Includes cleaning, sanding and application tools
• Approx. 3 hour application time
• 48 hour total drying time

Kit contents:
1 x tin of Tubby coating
1 x tin of Tubby hardener (150ml)
1 x roller handle
2 x roller heads
1 x paint brush
1 x masking tape
3 x plastic bags
1 x paint tray
2 x sheets of waterproof abrasive paper
1 x paint stirrer
1 x cleaning powder and sponge
2 x pairs of plastic gloves
1 x dust mask
1 x instructions

Application instructions:
Clean and sand the bath, fill any chips, and mask off the surrounding area. Mix the coating with the hardener, then apply two coats, letting the first dry fully before the second. Leave to dry for 48 hours before use. Full instructions included.